Lead Contamination – Sources And Remedies

When lead, a toxic heavy metal, is present in the environment at concentrations that could be detrimental to people, animals, and ecosystems, it results in a severe environmental and health concern. There are many ways that lead can enter the environment, including industrial processes, lead-based paints, contaminated soil, and old water pipes. Here are some crucial details regarding lead contamination.

Health risks from lead contamination

Lead exposure can have a negative impact on a person’s health, especially in young children and pregnant women. Even at low concentrations, lead exposure can harm internal systems including the kidneys, liver, and nervous system and result in developmental delays, learning difficulties, impaired cognitive function, behavioural issues, and more. Exposure to lead in adults can result in neurological abnormalities, high blood pressure, and problems during pregnancy.

Sources of lead contamination

• Lead-based paint – The Indian government passed regulations in 2016 that set a 90 parts per million limit for lead levels in paints. However, there are still issues with adoption, particularly in small and medium-sized businesses. Additionally, lead-based paint in older structures may crack or degrade over time, generating lead flakes and dust.
• Industrial activities – A number of businesses, including mining, smelting, battery production, and lead-acid battery recycling, have the potential to leak lead particles and contaminate the soil, air, and water around them.
• Soil contamination – Lead contamination in the soil, particularly in metropolitan areas or close to industrial locations, can be caused by lead-based paint, industrial pollutants, or previous use of lead petrol.
• Water pipes – When the water has corrosive qualities, old plumbing systems with lead pipes or fixtures can contaminate drinking water.

Prevention and remedies for lead contamination

• Following the regulations – To address lead contamination, many nations have put legislation in place. These rules could include limitations on the use of lead in consumer goods, recommendations for safely removing lead paint, and specifications for lead levels in drinking water. It’s crucial to get advice from regional health authorities, environmental organizations, or lead remediation specialists to comprehend and follow any applicable rules and laws in your city or state.
• Personal Protective Equipment – You must make sure that any employees who might come into contact with lead are wearing proper personal protective equipment, such as gloves, coveralls, respirators, and safety glasses. The level of exposure and particular requirements should be taken into consideration while choosing any such equipment.
• Wet cleaning methods – It is essential to use moist cleaning techniques like wet mopping, wet cloth cleaning, and vacuuming in order to collect and remove lead dust.
• Regular cleaning and maintenance – Routine cleaning and maintenance procedures can guarantee that lead-contaminated surfaces, equipment, and ventilation systems are cleaned and maintained appropriately, thus lessening the chances of lead dust building up and spreading.
• Engineering controls – It is essential to put in place engineering controls to reduce lead dust production in the first place. This can involve dust collection systems, local exhaust ventilation systems, or lead-containing material containment enclosures.

Oil Mist Collector – For businesses that have contamination problems as a result of metal production procedures for lead goods and components, installing a mist collector may prove to be a wise decision. With the help of their hoods and duct systems, these collectors can filter and get rid of harmful lead oil mists. The Mistkiller from Powertech Pollution Controls is a high-efficiency centrifugal working oil mist collector that preserves a healthy environment by capturing and regulating most types of mist.

For more information, visit: https://www.powertechpollutioncontrols.com/

Oil Mist Collectors – Compliance With Safety Regulations

As governments and regulatory authorities have come to understand the need of safeguarding our planet’s natural resources and ensuring a more sustainable future, environmental rules have become even more stringent in recent years. Air quality is one of the regulations’ main areas of attention. Companies must now abide by laws governing air pollution and other environmental considerations. Employing mist collectors is a crucial component of adhering to these laws. Mist collectors are tools used in industrial settings to capture mist and other airborne particles, enhancing air quality and assisting businesses in adhering to environmental requirements.

The importance of adhering to environmental regulations

The protection of the environment, the maintenance of the health and safety of your workplace environment, and a long-term sustainable future, all depend on the adherence to the set environmental regulations. These laws are intended to reduce pollution and other harmful practices that could harm the environment and people’s health. Following these rules can result in better air quality, less waste and energy use, and a healthier workplace. Companies must put environmental regulations at the top of their list of priorities in order to protect both the environment and their long-term commercial viability.

The role of mist collectors in environmental compliance

As they can drastically lower the quantity of hazardous particles and chemicals released into the atmosphere, oil mist collector systems play a crucial role in assisting businesses to comply with environmental rules relating to air pollution. These systems are designed to collect smoke, mist, and other airborne particulates produced during production operations in a range of industries, including metalworking, woodworking, and food processing. Environmental compliance is thus important in such equipment as many of the pollutants generated in such operations, such coolant mist and oil, can have detrimental effects on both human health and the environment. Oil mist can lead to respiratory troubles as well as other health problems when inhaled.

Oil mist collector systems help make sure that businesses adhere to the stringent environmental standards established by regulating authorities by catching these pollutants before they are released into the air. They also benefit enterprises economically. Industries can avoid exorbitant fines and penalties for breaking environmental regulations by minimizing the amount of pollutants they emit into the environment. By enhancing worker air quality, mist collectors can also aid in enhancing the overall effectiveness of the manufacturing processes. Environmental concerns can improve your public profile as a show of company values and draw investors looking for environmentally friendly enterprises, even while regulatory compliance is crucial.

How Powertech Pollution Controls’ mist collectors can help

Powertech Pollution Controls is a manufacturer of mist collectors that can assist businesses in adhering to air pollution-related environmental standards. Mist and other airborne particles produced by industrial processes are captured by these mist collectors, which aids in meeting regulatory standards for air quality and reducing emissions of dangerous air pollutants. Known as the Mistkiller, these mist collectors are simple to install and maintain, which can assist businesses in adhering to regulatory standards for the setup and maintenance of equipment. All in all, installing the Mistkiller oil mist collector can assist your business in adhering to all the required regulatory standards, while safeguarding your equipment, workers, and workplace.

Metal Coatings – Increasing The Danger Of Welding Fumes

Welding fumes comprise of the oxides of the metals in the materials being welded. These metal oxides, which are released during welding, can bring about a number of health dangers to the welder and those around, if there is no protection by personal protective equipment, or inadequate ventilation and fume removal systems. This is why it is recommended that there is proper ventilation in the welding workspace, and a welding fume extractor India installed. also, every welder is advised to wear personal protective gear like goggles, face masks, leather gloves, leather shoes, and more.

Metals producing hazardous fumes

Different flux compositions, which can result in bodily complaints and serious diseases, are to blame for the risks. Here are a few examples of welding fume compositions –

• Steel welding produces iron, along with minor levels of other metals like chromium, nickel, manganese, molybdenum, vanadium, titanium, cobalt, and copper
• Stainless steel welding produces chromium or nickel, along with iron
• Nickel alloys produce nickel and iron
• Silica or fluoride-containing fluxes produce amorphous silica, metallic silicates, and fluoride fumes

Metal coatings posing more danger

If the metal itself wasn’t enough to cause so much harm, the additional coatings over the metals can pose even more threat to the welder, and those in the vicinity. When welding a coated metal or a metal with residues, the fumes can be much more hazardous. Some such harmful coatings or residues include oils, metalworking fluids, rust preventatives, cadmium plating, plastic coating, paint coating, zinc coating, and lead oxide primer coating.

Taking off the coatings first

When any of the extra elements mentioned above are present, the metal particles and metallic oxide combine with them, lingering in the air for several hours. It is thus advised to clean the air before, during, and after the welding process. Also, it is recommended to remove all the coatings and residues before beginning the welding process. Removing the coatings will not only reduce the dangers during and after welding, but will also enhance the welding quality itself. Special products can be used for stripping off these coatings, or wet slurry vacuum removal procedures may be used. It is important to adhere to the recommended safety precautions, and put on the required personal protective equipment during the coating removal process, based on risk assessments, manufacturer’s guidelines, and potential exposures.

As you can see, welding fume is a composition of a variety of metallic oxides, fluorides, and silicates. So, it is very important to get rid of all the coatings and residues, keep the space well-ventilated, and wear protective gear while performing the welding procedure. But, at the same time, it is also important to install a genuine welding fume extractor India within the premises, which can constantly eliminate any welding fumes being generated. One fine example is the Fumekiller from Powertech Pollution Controls, which is a high-efficiency two-stage electrostatic precipitator, combined with electrostatic filtration technology, designed to capture and control fumes, mist, smoke, and fine dust produced by welding, soldering, and other similar processes.

For more information, visit our website: https://www.powertechpollutioncontrols.com/

Oil Mist – The Dangers And Prevention

Oil mist is a common problem in many industrial and manufacturing workplaces that involve the usage of oil, which can be hazardous for the health of the workers within the premises. oil mist is created when oil lubricates the parts in a machinery, breaking down into small droplets that float in the air. When these tiny droplets are inhaled by workers, it causes lots of health problems.

Dangers of oil mist

Oil mist, which is caused by the vapourization of the cooling lubricant around rotating tools, or the condensation of vapourized cooling lubricant on warm surface, coats all the machineries around. Long-term or repeated exposure to such mist proves to be harmful for health. Workers who are exposed to it are at a very high risk of developing skin disorders, respiratory problems, occupational asthma, bronchitis, or any other such respiratory tract irritation or breathing difficulties. It is thus your duty, as an employer, to reduce the oil mist within your workplace at the earliest!

How to control oil mist?

There are many ways to reduce oil mist in the workplace, one way being to install an oil mist collector, which is a device that removes oil mist from the air, using filters. When choosing an oil mist collector, it is important to consider the size of machine you are using, and the type of mist being generated within the space. Let’s look at these aspects in detail.

• Type and size of the machine – The size of your machine can let you know the size of the mist collector you need. A small machine can need only a smaller mist collector, while the larger the machine, the larger the collector you’ll need.
• Type of oil mist generated – There are two main types of oil mist that can be generated, namely oil-based and water-based. Water-based oil mist is easier to collect, but difficult to remove from the air. Oil-based oil mist is, on the other hand, difficult to collect, but easy to remove from the air.
• Type of oil mist collector – There are two types of oil mist collectors, namely cartridge and cyclonic. Cartridge collectors are more effective and expensive, while cyclonic collectors are affordable, but not as effective in performance.

Choosing your mist collector

Choosing the right mist collector is important. With the right mist collector, you’ll be able to keep your machine running smoothly and efficiently. Also, the health of your workers will not be compromised while they’re working for you, which means a happy healthy environment for them. Powertech Pollution Controls offers a high-efficiency oil mist collector, under the trademarked name Mistkiller, which is designed and developed to control most types of mist, generated by the use of water-based coolants or liquids. It works primarily on the principle of high-speed centrifugal collection of liquids. Compared to other types of filters, its efficiency is high, with the maintenance and running costs being quite low; thus an added benefit for you. Contribute to a safer and healthier work environment for your workers by installing the Mistkiller!

Website: https://www.powertechpollutioncontrols.com/

Installing An Extraction Arm Within Your Workplace

An arm system is a special installation utilised in the workplace to extract fumes from a line of welding booths, together with welding extraction systems. Before the contaminant can enter the worker’s breathing zone, an extraction arm can catch aerosols or any other airborne pollutants at the emission site. The suction hood can be placed with complete ease and flexibility directly at the source of the fume generation, capturing fumes close to the source to prevent them from spreading throughout the workplace and negatively harming everyone who works there. Installing several arm systems at your workspace allows you to autonomously position each arm so that it is close to each welding fume source.

Which industries may require such extraction arms?

Extraction arms are available in a range of lengths and radiuses, to suit individual applications. The versatility of such systems and their configurations make them ideal for where work is done in predefined spaces, as well as for larger installations, where workpieces may vary greatly in size. The common industries and applications for such extraction arms include aluminium welding, steel welding, copper alloy welding, magnesium welding, nickel welding, buffing, polishing, core grinding, drilling, soldering, screen printing, pesticide manufacturing, plastic manufacturing, resin manufacturing, rubber manufacturing, soap manufacturing, animal food manufacturing, food packaging plants, jewellery manufacturing, chemical laboratories, forensic laboratories, electronics assembly lines, heavy equipment repairing shops, vehicle service shops, and many others.

Where can you get the best extractor arm?

One of the finest extractor arm you can choose to install is that which is manufactured by Powertech Pollution Controls, which is a highly useful accessory that is used with the most popularly used welding fume extractor India, trademarked as the “Fumekiller”. The extractor arm consists of two ducts made of aluminium or stainless steel, connected by flexible PVC hoses, and mounted on interconnected support rods with friction-loaded pivots. One end holds a suction hood, while the other being attached to a rotating hollow cylinder. The suction hood, the ducts, the host, and the rotating cylinder form a passage for the fumes that are to be removed. The suction hood can be moved manually 2 to 4 metres to the left or right, up or down, depending on the requirement. This system’s operating and maintenance costs are comparatively very low because every component is designed for dependable, secure, and effective use. By removing harmful airborne contaminants, these systems help create a safer and healthier working environment at a very low cost.

Criteria to consider before installation

It is crucial that you take into account a few fundamental factors before buying an extraction arm. The configuration of the extraction system you’ll require depends on a number of factors, including the processes you use, their intensity, how quickly contaminants build up, what kinds of contaminants they produce, how quickly airflow must move through the system to capture them, and the physical restrictions or protocols of your facility, such as its size, capacity, number of employees, internal pressure and temperature, etc. Before choosing a certain type of extraction system for your workplace, it is better to speak with an expert and go over all of these factors.

Website: https://www.powertechpollutioncontrols.com/

Student Safety In Welding Schools

Welding happens not only in workshops and manufacturing facilities, but also in other places like welding school and educational facilities. You can understand how bad the problem is when young students are exposed to such pollutants, as there is already enough concern about the toxic welding fumes and gases generated from the operations when adults work in workshops and manufacturing facilities.

How harmful are welding fumes to one’s health?

Welding procedures can produce a lot of fumes and gases, which may not be noticeable as they typically do not smell awful and are therefore not likely to be deemed intoxicating. But, these fumes are definitely intoxicating for the body even though the nose is not affected. They may also have an impact on the respiratory system, and cause skin allergies and also a variety of cancers! Yes, the contaminants in the fumes are so tiny that they aren’t visible to the naked eye, but they can easily enter the nose and travel to the lungs, from where they may then target other human organs and systems. This is why it is crucial to capture and remove these fumes from the area before anyone nearby inhales them.

Why are welding fume extractors necessary?

In an educational setting, it is the duty of the teachers to address any harm that welding fumes may cause, while also educating the students of the risks involved. To protect their hands and eyes while performing the processes, students are typically instructed to wear safety equipment such as leather gloves, gauntlets, safety glasses with side shields, welders’ goggles, and welders’ helmet. Nevertheless, what about the microscopic invisible toxins that enter the nose and gradually harm the body from within!? It is crucial to install welding fume extractors at each location where welding activities are carried out in order to tackle this problem. The Fumekiller from Powertech Pollution Controls is one promising welding fume extractor. The company has been providing leading companies in the nation like Toyota, Suzuki, HAL, Bharat Electronics, TVS, Wipro, and many others with not only their welding fume extractors, but also a variety of other products like soldering fume extractors, mist collectors, dust collectors, and more; thus making it a trusted partner.

The responsibility of welding instructors and students

To achieve the highest levels of safety, welding teachers and students should take the initiative to follow the right protocols while welding. In addition to the welding techniques being taught, it is the obligation of the educators to make sure that students are instructed on welding hazards, safety laws and regulations, and that they also take the necessary safeguards. Likewise, it is the students’ responsibility to follow the safety instructions given to them, adhere to the laws governing safety, learn how to use the equipment properly, and protect themselves with the appropriate safety equipment.

The health concerns that welding fumes pose extend beyond just the conditions outlined above. Many other things, such as electric shock, fire, explosion, extreme heat, asphyxia, flying sparks, and electric and magnetic fields, are also possible outcomes of these gases. To avoid any risks, mishaps, or injuries in the classroom, welding schools must thus adhere to all local, state, and federal regulations.

Website: https://www.powertechpollutioncontrols.com/

Before Buying A Welding Fume Extractor

Welding fume extractor is an important part of every welding operations premises. With welding comes a high concentration of welding fumes, which can prove to be extremely hazardous. An extractor in place can help remove these fumes before they start influencing the workers around.

A welding fume extractor is considered efficient when it is capable of removing all kinds of fumes as well as the smallest of particles, while improving the indoor air quality and working as an equipment to protect everyone within the premises. Choosing one such efficient fume extractor is important, which can be based on your requirement, from light to moderate to extensive usage. You can also choose between a stationary fume extractor and a portable fume extractor, depending upon your workspace and operations.

The best welding fume extractor will contain the following features –

Extraction power

The energy efficiency and extraction power need to be adequate. The hazardous fumes and other components need to be immediately removed from the workplace, channelled into the pipe system, and expelled out, or suitably filtered to recirculate clean air within the premises.

High air filtration efficiency

You need to choose a welding fume extractor that has a high rate of suction airflow and purifying efficiency. This is mainly recommended for repair shops that work in rigid climates. The efficient filers should be suited to the dust concentration that characterizes the fumes generated.

Less maintenance and durability

The welding fume extractor should be easy to operate, as well as be very low on maintenance, with low system costs. Also, when required, there should be hassle-free replacement and cleaning of the filters. Changing the filters is a process that typically needs to be done once a year, for the equipment to maintain its full capacity.

Meeting the regulations

Regulations set by various regulatory authorities should be met, to reduce the risk of exposure to hazardous fumes. If the kinds of hazardous fumes aren’t taken care of, it can severely impact the health of everyone within the premises, leading to skin infections, eye irritations, throat irritations, respiratory tract disorders, and even cancer of various organs within the body! Indian regulations that are set for such equipment are more supportive of the prevention of any such risk caused by industries.

You can see how it is important to select the best welding fume extractor for your application. The fume extractor you choose should be best adept to your needs. Also, the capacity of the fume extractor will depend upon how big your facility or workshop is. Whatever the size and type, make sure to buy one that is easy to use, durable, efficient, and cost-effective. For instance, you can opt for Powertech Pollution Controls’ Fumekiller, which is a high-efficiency two-stage electrostatic precipitator that is designed and developed to capture and control not only fumes, but also mist, smoke, and fine dust; thus proving to be the most reliable welding fume extractor India. Moreover, this particular equipment comes with filter modules that are many times washable and re-usable during the life of the equipment. Also, there are many safety features incorporated, such as limit switches, motor protection, and high voltage fault trip circuity, which ensure safe, reliable, and efficient functioning. All in all, with the Fumekiller, you’ll have a safer and healthier work environment, where every possible toxic airborne pollutant is removed.

Visit our website: https://www.powertechpollutioncontrols.com/

The Importance Of Oil Mist Removal

In the last decade, repeated outbreaks of respiratory problems in manufacturing plants have raised concern about the exposure to oil mist and smoke, putting into focus an oil mist removal provision for manufacturing, automotive, and welding workspaces. Numerous cases of respiratory disorders have been reported in machining, welding, automotive, and food processing plants, which has forced researchers to take a closer look at the potential dangers of exposure to a variety of oil mists.

What is oil mist?

Oil mist is created when oil lubricates the moving parts in the machinery, wherein the oil breaks down into small droplets that float in the air, and can be breathed in by the workers. The mist can also settle on surfaces and clothing, which may result in a fire hazard; or on the flooring to cause slips, falls, and injuries.

How to capture oil mist?

Oil mist is semi-volatile in nature, but can be controlled by enclosing the process, and ventilating the enclosure with oil mist filters, oil mist separators, and air filtration equipment, which can all capture and retain the harmful mist droplets, without letting them harm the health of people within the workplace. However, it isn’t as easy as it seems. Because of the semi-volatile nature of the oil mist, they partition back and forth between vapour and droplet phases, depending upon the make-up of the liquid, and the environmental parameters like temperature and pressure. Thus, effective control and measurement of oil mist is particularly difficult, but at the same time important, and should consider the entire process; not just the collection of droplets alone. This is where an efficient oil mist collector is required.

Choosing an oil mist collector

When choosing a mist collector, it is important to consider the type of machine tool you are using, and the time of mist that is being produced. The size of your machine will dictate the size of the mist collector you need. A small machine requires a small mist collector; and a large machine requires a larger mist collector. And, the type of mist being produced also needs to be considered, because water-based oil mist is easier to collect, but difficult to remove from the air; while oil-based mist is difficult to collect, but easier to remove from the air. Depending upon these two factors, you can choose to have a cartridge or a cyclonic mist collector. Cartridge mist collectors are more efficient at collecting the mist, but are also more expensive. On the other hand, cyclonic mist collectors are less expensive, but aren’t as effective at collecting the mist.

Choosing the right oil mist filtration system is thus very important to ensure employee safety. Powertech Pollution Controls can help here. At Powertech Pollution Controls, we have the most ideal solution to capture most types of mist. Trademarked under the name “Mistkiller”, it is a high-efficiency centrifugal oil mist collector that is designed and developed for the control of most types of mist, generated by the use of water-based coolants or water-based liquids. With this mist collector, you’ll be able to keep your machine running smoothly and efficiently.

For more information, visit: https://www.powertechpollutioncontrols.com/

What Makes Welding Fumes So Toxic?

Welding fume is among the greatest risks that welders face, as it poses lots of health issues, even as dangerous as cancer! The WHO’s International Agency for Research on Cancer classified it as carcinogenic to humans, underlining that welding fume protection deserves utmost attention.

What harmful components are contained in welding fume?

Welding fumes are a mixture of gases and particles that are generated during welding; the most harmful ones being iron oxide, titanium oxide, magnesium oxide, aluminium oxide, fluorides, carbon monoxide, nitrogen oxide, copper oxide, lead oxide, nickel oxide, and beryllium oxide. Iron oxide, titanium oxide, magnesium oxide, and aluminium oxide are harmful to the lungs and respiratory tract. And, others like carbon monoxide, nitrogen oxide, copper oxide, lead oxide, and fluorides are highly toxic in nature.

How do these harmful components prove fatal?

All the harmful particles in the welding fumes are absolutely small in size, which allows them to penetrate deep into the lungs. This slow deposit goes unnoticed in the beginning, but as time passes, health problems become apparent over the years. Or, it may even take decades for the symptoms to show up, but by the time, the issue becomes quite treacherous. The symptoms can begin as mild headache, nausea, and fever, but they slowly develop into much dangerous ones over time as the welders are exposed to high concentrations of welding fume particles over a longer span of time. Unprotected long exposure to these harmful substances can cause chronic respiratory tract infections, lung diseases, nervous system damage, and even cancer of various body parts!

What factors influence these harmful substances?

Several factors influence the volume of hazardous substances present in welding fumes, which include the main material, filler metals in the rod and wire electrode, and the shielding gas. The welding method used and the processes involved also have a significant influence on the harmful substances in the welding fumes. For instance, manual arc welding and MIG/MAG welding processes generate more fumes than TIG welding. And, the lowest health risk is associated with automated welding processes that are carried out in suitably equipped welding cells by robots.

How can welding fume danger be controlled?

Anti-glare helmets are the basic thing every welder must possess. Further, employing the Cold Metal Transfer process can also reduce the risk posed by welding fumes, as this welding process is characterized by very low heat input and low amounts of welding spatter; thus reduced welding fumes. Another most significant way to reduce health-related risks is by installing a welding fume extractor within the welding premises.

What is a welding fume extractor?

A welding fume extractor is a filtration system that captures and controls the harmful particles in the welding fume, eliminating them, and bringing in clean air into the premises for the workers to breathe in. For instance, Powertech Pollution Controls’ Fumekiller is a high-efficiency two-stage electrostatic precipitator that is designed and developed for the capture and control of fumes, mist, smoke, and fine dust. The equipment contains an electrostatic filter that sucks in the particles in the welding fume, which first enter the pre-filter where large particles are removed, after which the small particles are pushed in the electrostatic module. Here, these particles receive a high positive charge between a series of parallel aluminium plates, after which they’re made to pass through another series of plates that are negatively charged. Hence, these positively charged particles get attracted to the negatively charged plates, and stick to them, while being adhered even after the filter is turned off. The clean air is then set out through the outlet into the premises. This particular welding fume extractor can be used in a wide range of applications including welding, induction hardening, oil quenching, wire drawing, annealing, dip tinning, soldering, rubber curing, die casting, and many others.

For more information, visit: https://www.powertechpollutioncontrols.com/

Why Is Fume Extraction Necessary?

Many manufacturing and assembly operations, where harmful fumes and particles in the air can be detrimental to worker health and safety, require by law to arrange for fume extraction. In applications involving welding and soldering, lots of smoke and fumes are produced, which contain a variety of toxins, depending on the materials being used. All these harmful toxins and gases can expose worker to high levels of health risks, targeting the respiratory system, nervous system, kidneys, blood, and skin. Prolonged exposure can result in various types of cancer too! Let’s take a detailed look into the matter.

How do different gases and fumes affect the body?

• Manganese toxins released from welding rods irritate the respiratory tract, the prolonged exposure of which can cause pneumonia. Also, higher concentrations of such toxins inhaled can lead to various types of cancers, and also damage the entire nervous system of the body.
• Iron oxide released from welding steel can lead to a slow but harmful build-up of dust in the lungs, which can lead to obstinate coughing, persistent breathlessness, and decreased lung function. This can cause the lung tissues to harden, resulting in the restriction of the functioning of the lungs. Also, the lung connective tissue can be chronically inflamed, leading to affecting the fine walls of the alveoli.
• Lead oxide from soldering applications which can cause loss of appetite, indigestion, constipation, abdominal cramps, vomiting, nausea, headache, insomnia, respiratory tract irritation, asthma, skin rashes, and dermatitis.

These are just a few examples of how the gases and fumes from welding and soldering can cause harm to the body. There are many other such applications and industries that require fume extraction, because of the dangerous fumes generated. So, what is the solution?

How to maintain a safe working environment?

Wherever such harmful fumes and gases are generated, it is the responsibility of the employer to take care of the health and safety of the workers. Whether it is direct welders, or other workers within the premises, these harmful gases are likely to affect everyone inhaling them. One best solution to eliminate all such hazards is to install a fume extraction system, which is responsible to capture harmful fumes, gases, smoke, and other airborne contaminants. These systems can be used in a variety of applications like welding, soldering, grinding, laser cutting, plasma cutting, and deburring.

What is a fume extraction system?

A welding fume extraction system involves a setup wherein there are a set of filters that capture any harmful gases and fumes within the air, and purify the air by eliminating all the toxic substances within. Thus, workers have access to clean air, eliminating almost all of the hazards involved with the welding and soldering processes. There are a wide range of extraction systems available, but the choice you make depends on a variety of factors like the type of welding/soldering procedures executed, the size of the workplace, the metals and materials used, and the frequency of operations. Also, such systems are available in fixed and portable types, which you can choose as per your requirement and purpose. One of the best solutions that can be recommended for use in almost any kind of application is Powertech Pollution Controls’ Fumekiller.

Powertech Pollution Controls’ Fumekiller The Fumekiller is a high-efficiency welding fume extractor that is designed and developed for the capture and control of fumes, mist, smoke, and fine dust. The extractor possesses an electrostatic filter through which the fume particles are passed and filtered. First, larger particles are removed through the prefilter, after which finer particles enter the electrostatic module, where they receive a positive charge. These positively charged particles are then attracted to the negatively charged aluminium plates, through which they pass and stick to, resulting in clean air escaping out of the outlet, into the premises. This welding fume extractor India is one of the finest solutions because the filters used within the system are washable and reusable, thus eliminating the need to replace the filters now and again. This reduces both the running and maintenance costs. Also, there are many safety features incorporated within the system such as limit switches, motor protection, and high voltage fault trip circuitry, which bring about safe, reliable, and efficient functioning. You can thus have a thoroughly safe and healthy working environment with the Fumekiller!

For more information, visit: https://www.powertechpollutioncontrols.com/